Biuro Jeżów

46 875 52 18

Salon Skierniewice

46 832 63 55

Salon Łódź

42 679 27 77

Formularz zapytania

PE68 Windows

pe68The system consisting of a three-chamber structure of the profiles with a fitting groove in the "euro" standard and with a fitting groove used in balcony windows and doors of PVC or wooden profiles. 

The structural depth of the profiles for frames is 68 mm, and for leaves is 76 mm. 

In comparison to the PE 60 system, a wider, 32 mm thermal distance piece and two-component, central seal guarantee high thermal parameters.

Thanks to the modernization of the sealing elements, there is no need for using drips, which positively affects the aesthetics of the façade.  The system allows for the use of a wide range of fittings and facilitates their installation. The three-chamber structure of the profiles of the Ponzio PE 68 system provides high rigidity of the profiles, and thus allows for making structures with large dimensions.

Close connection with other Ponzio systems:

  • possibility to face window leaves (one plane on the external side)
  • possibility to use fillings with a thickness of: 18-59 mm,
  • possibility to use modern, two-component seals made of EPDM;
  • possibility to bend profiles;
  • many ways of making corner connections.

Technical data

Aluminum profiles
EN AW-6060 acc. to PN-EN 573-3 class T6 acc. to PN-EN 515 Al Mg Si 0.5 F22 acc. to the standards DIN 1725 T1, DIN 17615T1

Thermal insulation properties 
Frame heat transfer coefficient Uf = 1.8-2.0 W/m2K

Single windowpanes or windowpanes laminated with each glass type or opaque panels.

Methods of finishing the surfaces
Powder coating with polyester paints meeting the Qualicoat requirements, colours from the RAL list; anodizing in colours: natural aluminum, olive, champagne, gold, "old gold", brown - meeting the Qualanod requirements; varnishing with the wooden “colour.”.

Made of synthetic rubber EPDM according to DIN 7863 and the executive standard according to ISO 3302-01, E2.

Corner connectors, screws, bolts, aluminum, stainless steel or galvanized steel washers

By renowned companies: Savio, Erreti, Hautau, Winkhaus etc.

Permissions and quality certificates
Preliminary type tests acc. to PN-EN 14351-1
Anti-burglary test: RC2 class acc. to PN-EN 1627